MARKET
Wanted equipment
-
Mainsail bom/spare (Aluminium part).
Swan 40/003, Original rigging. I have been diligently searching the internet in pursuit of a new aluminium mainsail boom or a... -
Stainless Genoa Tracks - #3 gib
I want to retrofit stainless genoa tracks around the cap shrouds for sheeting #3 and #4 jibs on my Swan 37. Any... -
Spinnaker Pole 18FT
Greetings. Looking for an ~18FT (but no shorter) spin pole in carbon, maybe off a boat that has retired the... -
Looking for a S&S Swan 36 boom
Hi to everyone: I'm looking for an original boom for Swan 36. If you have one to sale, please contact me. Thanks a... -
Swan 38 boom Looking for
Dear Friends,should you have a boom of a S&S Swan 38, I am interested as I have broken mine.Thanks, Jens-Werner... -
B&G Boat Speed Display
I'm looking for an original B&G Boat Speed display if anyone has one that they may have replaced following an... -
Swan 47 vent cover
Does anyone knows if these vent covers for Swan 47 are still available and where they can be ordered? ... -
431 Half Hull Model
This would complete my interior. Hope you can help me out. Mark Sandstad. Auckland. New Zealand.... -
Goiot Nav Lights
I am looking for a green glass for Goiot navigation light… or, as I have an old used white glass, some... -
Genoa light 130% for my 47'
Looking for a Genoa 130 /140% in light dacron, crosscut or tri radial is indifférent, in good condition. In Italy. I... -
Grinding Pedestals
We are competing in the 2023 Ocean Globe Race on our Swan 59 ICEBEAR and are looking to refit her... -
Arceaux
Pour un SS Swan 48, ou peut-on se procurer les grands arceaux pour le roof... -
Mast for Swan 57 Sloop
I would like to find an original mast for a Swan 57 Sloop. Standing rigging will be considered also if... -
Luke Heritage Stove
Hi all, I'm hoping someone can help me, I am looking for an original Luke Heritage Stove 3 x burner for... -
Goiot Navigation Light - green glass needed
Dear All, retrofiiting Saga 47-015 and is looking for a green Lantern glass for my Beautiful Old Goiot Navigation lanterns model: MM... -
Manual Windlass Wanted
Hello to everyone. I'm looking for a manual windlass for a swan 36, original if it's possible. I'm also interested in a... -
Original Swan 37 boom wanted
I'm looking for original boom to our Swan 37/ 042 Martha. Please send a mail or call me if you... -
Old Hella navigation lights wanted
I'm looking to replace my old Hella 2386 navigation lights (both port and starboard). They seem to discontinued by Hella.... -
Original Destroyer type steering wheel Swan 65
Looking for the original curved destroyer type steering wheel. Trade in with current large wheel possible.... -
Swan 411 Boom Wanted
I am looking for an original boom for a Swan 411.... -
Electric autopilot
Electric Autopilot for SWAN 40 wanted.... -
Instrument console
Instument console built by Nautor in the beginning of the 70th. Normally left an right of the entrence.... -
SWAN 40 Hull 48 Ballerina II
Jockey boom wanted for sale or relevant guidance for where to get one.... -
For cabin's Pipe berth S&S 47
I am looking for original pipe berths for Walidada. Please contact Jonathan: cardross@me.com ... -
Sails for Swan 57 sloop wanted
Looking for used sails for Swan 57 sloop. Racing or/ and cruising Also wanted carbon spi pole and jockey pole.... -
Trim tab and locking wheels for 43
All, I have the original steering wheel for my 43 but need the two inner wheels - one is for... -
Sails for Swan 48
Dear all, searching for fair used sails for a Swan 48 with "Heavy weather Rigg". Main sail P= 16,30 m E= 5,30 m Head sails JL=... -
Water Cap
Looking for an original "Gas Cap" for a Swan 41.... -
winchs barlow wanted
I am looking for two winches BARLOW 28 ST for a swan 36thank youhave a nice dayE. RUDELLE... -
NECO spares
I am looking for parts of old NECO 692/693 autopilot systems in order to fix other units. Any item... -
Swan 65 - Mast Wanted
Looking for a mast from a Swan 65/651 for 65ft Sloop. i.e. 27 metres or 29 metres. Possible for mast... -
B&G Speed Impellers Wanted
Hello; I'm looking for the:Impeller Spares Kit 110-10-B21 (white plastic with black 3 blade impeller) for B&G Speed Sensor Part...