selected shipyards

Selected specialists

Theese are selected shiprights and shipyards, S&S Swan specialists recomended only by our Members. We do not accept suggestions by other people and we do not accept sponsors/advertisers.

  • Antigua

    Antigua Rigging

    We have had Antigua Rigging remove the rudder frozen bearing and they had a new one made. Excellent service, they know the problem and have been doing this before as they are very familiar with S&S Swans and worked with Nautor a lot. They wre also very well know with Nautor spare parts who referred them too. We are very pleased with their knowledge and expertise.

    Thanks to Lars and Stan from Antigua Rigging again.

    Recommended by: Martin and Henny (431/003 Snow, 2021)
  • Denmark

    Walsteds Boardyard

    Thuro, 5700 Svendborg
    Among many other things Walsted has changed the entire teak deck and installed electrical anchor winch. The quality of the work is superp and we can strongly recommend this boatyard to other SWAN owners. Walsteds Boadyard has for years new build / renovated Sparkman and Stephens yachts
    Recommended by: Jorgen Kristensen (38/059 Jacaranda)
  • Finland

    Yxpila Shipyard

    S&S Swan specialist, since 1976

    Recommended by: Jens Anker Sorensen (431/029 Juice)
  • France

    Strat-O-Sphere (Antibes)

    They are GRP and “Old Swans” specialist, and have been working on many S&S Swans (e.g. 38/067 Only You) deck hardware, in South of France, for nearly two decades: contact Lauren von Saenger +33 611 555 406 .

    Recommended by: Matteo Salamon (47/069 Vanessa)
  • France

    Chantier Naval Eric de Stefano (Antibes)

    12 bis Boulevard d`Aguillon, 06600 Antibes.
    Tel: 04 93 33 69 91, Fax: 04 93 33 01 64
    Can overhaul your boat, they are extremely careful, and they do love old S&S Swans!
    Recommended by: Christopher Smith (44/037 Favona)
  • France

    Hydro-Froid, "Sirius C"

    Chemin du Val fleuri, 06800 Cagnes-sur-Mer.
    Tel: 04 93 31 93 63, Mobile: 06 07 03 84 34, Fax: 04 93 31 16 46.
    Contact: Pascal Rouan - Artisan Frigoriste.
    Recommended by: Christopher Smith (44/037 Favona)
  • France

    SMF Port Grimaud

    SMN replaced our teak deck in 2003, did the epoxy treatment of the hull in 2009, and replaced our standing rigging in 2011. All to our satisfation. This is a very dedicated and competent team to look after your Swan
    SMN Chantier Naval de Port Grimaud 83310 Port Grimaud Tel: 33 (0)4 94 56 02 25 Yard manager: Patrick Chevalier Mail: smn@smn-port-grimaud.fr Internet site: smn-port-grimaud.fr Patrick speaks english.
    Recommended by: Philippe Vidal (41/022 Soeur Anne)
  • Germany

    Ramm Yacht Service

    Hans-Werner Ramm, Schauenburgerstr. 17, D-22880 Wedel, Mobil + 49 (0)171 9283033, Telefon: + 49 (0) 4103 9883203, Fax + 49 (0) 4103 97141.
    In 2002 I hired a guy to put down some teak deck in the cockpit and during discussions it turns out he has spent a great deal of time working on and restoring S&S Swans and had the pleasure or working with Rod Stephens. He has proven to be the best individual I have come across in 30 years of sailing and if there is any work which I need a hand with or don't have time to do myself he is the only one I trust to do the job. I even prefer his solutions to mine
    which is for me a hard thing to admit.
    Recommended by: Michael St. John, (40/ 028 Storm Svale)
  • Italy

    Elio Borio - Deck Hardware and General Overhaul

    Deck Hardware Specialist - La Spezia area, Italy, phone +393387073619, email: borio.elio@gmail.com

    I just wont to point out to all our friends from S&S how Elio's work has been unbelievable. He fixed the center board on my S&S Swan 47 and he was able to incredibly design and mount a bowsprit. Really a pro!
    Ciao a tutti Roby

    He's been responsible of the deck refitting of 47/069 Vanessa. He knows classic Swan better than everyone else!

    Recommended by: Roby Aimone, (47/058 Lolita, 2015) - Matteo Salamon (47/069 Vanessa, 2015-2022)
  • Italy

    Enio - Stainless Steel Craftmanship

    Enio Passalacqua is one of the best craftmanship in stainless steel, he is able to repair/built nearly everything, worked on many S&S Swan over the last 10 years.
    Enio: Phone/Whattsapp +39 392 996 02 90 - eniopassalacqua66@gmail.com

    Recommended by: Matteo, (47/069 Vanessa), July 2021