Theese are selected shiprights and shipyards, S&S Swan specialists recomended only by our Members. We do not accept suggestions by other people and we do not accept sponsors/advertisers.
Fuselli - Danforth Constellation Restorer
Fuselli Fassio is a family owned company, in Genoa, they are able to get a brand new life to your original Danforth Constellation (or Suunto D-165) compasses.
These are irreplicable compasses, built to last forever, and deserve to last forever! Fassio can do it!Recommended by: Matteo Salamon (47/069 Vanessa)
Electrical and Electronic Specialist (based in Tuscany, travels all over the world)
Technician No 1 in the world, no compromise!!!
+39-329-4906154 - email@example.comRecommended by: Stefano Cioni (411/009 Oracabessa, 2015) and Matteo Salamon (47/069 Vanessa, 2021)
Cantiere Navale Pezzini (Viareggio)
After 4 generations and more than 100 years of experience in boat building and boat restoration, you can imagine they have accumulated a lot of experience.
(winter 2019/2020) They are rebuilding 47/069 Vanessa's teak deck and doing a major refit, deck and hull. My opinion: simply the best in the world!Recommended by: Matteo Salamon (47/069 Vanessa, 2020)
Velscaf: Nautor Mast Refit
Nautor, in the old times, built their own mast/booms/rigging. Their quality and craftsmanship is unrivaled (a pity they stopped building mast 15 year ago). So, if you want to give 40 more years to your original mast/rigging you have to send it to Franco Manzoli (Velscaf), In my opinion his knowledge and craftsmanship quality is as good as Nautor used to be. 2019 complete refit of 47/069 Vanessa's mast, boom and rigging.Recommended by: Matteo Salamon (47/069 Vanessa, 2021)
EMV Marine (Nautor Global Service)
"...Of course, I recommend NSGS – EMV Marine!"
"...I think we can recommend, even for a classic S&S Swan, all the yards from the new “Nautor Swan Global Service” entity, as they want to put in customers mind that “a Swan has to be maintained and refitted by Swan...” !Recommended by: Yves Mendegris (57/007 Algol, 2021)
Ellos Teak Service AB"The company doing this new teak deck work for me is one of the most famous in Scandinavia: ELLÖS TEAK SERVICE AB in ELLÖS, the famous Island where the most prestigious scandinavian yachts are build. This company does the teak work for all the boat builder in the region. They also do other work such as modifications and reconfiguration of the deck as well as the interior. They have a great specialisation for this kind of job and a very acknowledged proficiency. I am very satisfied with their approach, their relationships to customers, their willingness to find solutions, and of course their work.
I strongly recommend ELLÖS TEAK SERVICE AB."
"Founder and Manager: KAJ JUUSOLA,
Tel: +46 304 516 15; Mobile: +46 70 674 90 59"
Address: Gullvivevgen 5
474 32 Ellös
SWEDEN"Recommended by: Philippe Daudi, 47/050 Farouche
Booth and WilkinsonShaw Way, Mount Batten Marina, Plymouth, Devon UK -Tel. 01752 408488; Mobile 07766 673809
I have just had my boat Jaka (Swan 41, hull number 41) refitted in Plymouth, UK. This has included a new teak deck. The work was completed to a high standard and at a very reasonable cost. I would like to recommend the team responsible who are keen to work on more S&S Swans.
Recommended by: dr. Rob Ellis (41/041 Jaka)
Clare Lallows, Cowes, Isle of WightClare Lallow is a well established boatyard on the River Medina at Cowes on the Isle of Wight. Founded in 1867, their reputation is based on traditional wooden boat building skills by master craftsmen - this is reflected in the superb teak deck that Lawrence Boarer of Lallows commissioned for my Swan 38 "Splash". Lallows also managed to refurbish and re anodise all the original deck fittings and blocks in order to keep Splash looking as original as possible. I am delighted with the results" Contact person is Lawrence Boarer Tel: +44(0)1983292112 firstname.lastname@example.orgRecommended by: Patrick Lund (38/108 Splash)
USA (East Coast)
Jamestown Boat Yard (Jamestown)During the winter of 2003/2004 my 1969 Swan 43 underwent a fairly extensive refit at the Jamestown Boat Yard in Jamestown, Rhode Island, USA. They performed a complete peel and new barrier coating on the original 35 year old bottom and a new Awlgrip paint for the hull. The project was done to a high standard and on schedule. Their care and knowledge for all vintages of Swans was reassuring and resulted in exceptional work. They maintain extensive records of various Swans and can usually repair or custom fabricate items no longer available.
The contact person is Andy Dickinson, tel: (401) 423-0600Recommended by: Hiroshi Nakajima (43/046 Hiro Maru)
USA (West Coast)
KKMI"...They have worked on numerous Swans including ours & we feel they provide excellent craftsmanship & care to their clients..."
KKMI (Keefe Kaplan Maritime Inc.) 530 W. Cutting Blvd. Pt. Richmond, CA 94804 (510) 235-5564Recommended by: Don & Candy Morganson, 44/015 Infidel